Nowadays the need for effective home plumbing is on the rise. The demand for products and equipment leads to some very innovative techniques that you can do yourself. Now is your chance to find something that works for your plumbing system. Here are some tips that you can use to get you started with doing your own plumbing.
Unclog drains with ease. Try using a plunger and drain cleaner, as your clog may simply be a build-up of hair and debris. If this doesn’t work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently, which will help to loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times, before the clog is cleared so don’t give up!
Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can’t do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.
At least once a year remove the faucet aerator and clean the screens. This helps it properly function. The function of a faucet aerator is to allow for an even flow of water and to conserve water. Be sure to clean out the aerator and you’ll notice a these things working.
Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.
Check your fixtures to ensure the overflow holes are clear of debris and mineral build-up. If your sink starts to overflow, the water will run into the overflow holes, this might not be a huge issue, unless they are clogged. As you routinely look for things needing attention, check to be sure that the overflow holes are clear and unblocked.
If water is not coming to the dishwasher, you most likely have a blockage somewhere. You will need to turn off the water supply and remove the hose that leads to the dishwasher. After securing the hose, turn the water back on. See if it feeds into a bowl. If not, then you must find the block where it is at which may include removing more piping.
As you have read, there are many different ways to deal with and maintain your own plumbing. You need to find the treatment that works for you. There is a ton of information that can help you get started. By following these tips, you are well on your way to doing your own plumbing like a pro.